Re: Fixed #
Posted by Graham Bullock
on June 5, 2013, 11:30 pm, in reply to "
Re: Fixed #"
Graham Bullock
It is late at night and I have had a dwink but, If the crank has to turn 720 degrees to turn the cam 360 degrees, then if the cam is out 180 deg the crank would have had to turn 360 deg. In other words the crank would be back where it was. So if the pulley and hence the cam sensor is reading correct but the cam itself is 180 deg out then all you would get is it injecting on a cylinder that is not on a compression stroke. I think? Graham
|
Message Thread | This response ↓
Peugeot 307 2.0 HDi 2001 - Non start, codes P1448 & P1435 - Fixed # - Pete Mutlow May 10, 2013, 6:12 pm
- Re: Peugeot 307 - Non Start - Carl Ford May 10, 2013, 8:02 pm
- Re: Peugeot 307 - Non Start - Allan Davis May 11, 2013, 10:07 am
- Re: Peugeot 307 - Non Start - Pete Mutlow May 11, 2013, 6:13 pm
- Re: Peugeot 307 - Non Start - Mark Carter May 11, 2013, 7:48 pm
- Re: Peugeot 307 - Non Start - Pete Mutlow May 11, 2013, 8:32 pm
- Re: Peugeot 307 - Non Start - Kevin Apps May 11, 2013, 9:14 pm
- Re: Peugeot 307 - Non Start - Steve Harrison May 12, 2013, 9:48 am
- Re: Peugeot 307 - Non Start - Pete Mutlow May 12, 2013, 10:42 am
- Re: Peugeot 307 - Non Start - Carl Ford May 12, 2013, 1:40 pm
- Re: Peugeot 307 - Non Start - aidan birley May 12, 2013, 1:44 pm
- Re: Peugeot 307 - Non Start - Pete Mutlow May 13, 2013, 12:32 pm
- Re: Peugeot 307 - Non Start - Pete Mutlow May 14, 2013, 7:40 pm
- Re: Peugeot 307 - Non Start - Dave Hill May 14, 2013, 9:47 pm
- Re: Peugeot 307 - Non Start - Pete Mutlow May 14, 2013, 10:14 pm
- Re: Peugeot 307 - Non Start - Dave Hill May 14, 2013, 11:24 pm
- Re: Peugeot 307 - Non Start - Pete Mutlow May 15, 2013, 12:09 am
- Re: Peugeot 307 - Non Start - Lee Mackintosh May 15, 2013, 8:06 am
- Re: Peugeot 307 - Non Start - Lee Mackintosh May 15, 2013, 8:49 am
- Re: Peugeot 307 - Non Start - Pete Mutlow May 15, 2013, 7:05 pm
- Re: Peugeot 307 - Non Start - Andy Evans May 18, 2013, 9:58 am
- Re: Peugeot 307 - Non Start - Pete Mutlow May 18, 2013, 5:44 pm
- Update. - Pete Mutlow May 31, 2013, 7:35 pm
- Fixed # - Pete Mutlow June 3, 2013, 6:59 pm
- Re: Fixed # - Dave Hill June 4, 2013, 8:37 pm
- Re: Fixed # - Lee Mackintosh June 4, 2013, 9:04 pm
- Re: Fixed # - Dave Hill June 4, 2013, 9:23 pm
- Re: Fixed # - Lee Mackintosh June 5, 2013, 11:02 am
- Re: Fixed # - Alan Ganter June 5, 2013, 9:44 pm
- Re: Fixed # - Graham Bullock June 5, 2013, 11:30 pm
- Re: Fixed # - Pete Mutlow June 4, 2013, 9:25 pm
« Back to index | View thread » |