I have been asked to provide the chassis number which is: VF33ARHSB82258246.
Carl: I will have another attempt to scope the injector current most probably on Tuesday. As I said in the original post nothing was showing on cranking but this may be down to the battery inside the Amps Clamp which at some point during the test went for green to red led.
Allan: I did not get system voltage at the sample injector with ignition on. Only 1v was registered on both supply and earth. On cranking, I got cranking voltage of approx 9v on BOTH wires. If in view of this, I still need to scope the cam/crank, I will do this on my next visit.
Thanks to you both and Dave H.
Regards
Pete M
Message Thread | This response ↓
« Back to index | View thread »