Re: Chapter 10 (lol)
Mike Whitworth - Administrator
Hi Tim, >>>>as long as you know which way your tool does them and follow that procedure and it works for you where is the problem<<<< I seem to recall (a long time ago, in a galaxy far far away)this thread was started because a member was using an aftermarket tool to do this job but even reading the instructions it still couldn't complete the task. After many wasted hrs he had to bail out and let the dealer have it. This thread has raised a lot of interesting points and hopefully cleared up a few problems along the way. We ALL know you should read instructions and follow them to the letter, some do but a lot don't "If all else fails, read the instructions" springs to mind. One of the problems with working on all makes is we need more than one tool to do the job, which means we may have to learn 2 or 3 ways of doing the same task depending on what tool we use. Some instructions can be misleading or even totally wrong, so don't you think it is a good idea to at least try to understand what each tool is doing and why? >>>>just because they dont do them in the way the dealer tool does<<<< From what I can see the aftermarket tools do do this job the same way as the dealer tool. The reason the issue is clouded by firing order/injector no is purely due to the way ford present the codes on the sticker on the cam cover. >>>>as long as they do the job<<< But do they? Mike
|
M.O.M. Miserable Old Manc
Message Thread | This response ↓
FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold # - Dave Jackson March 26, 2007, 11:06 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - martin young March 26, 2007, 6:33 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - JASON MARTIN March 26, 2007, 10:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - George March 26, 2007, 10:26 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 7:52 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Alan Kane March 27, 2007, 9:07 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 10:01 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 27, 2007, 7:38 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 28, 2007, 7:55 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Terry Wood March 28, 2007, 9:52 am
- Autocom CDP Pro users please read this - dave jacko March 28, 2007, 5:41 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 6:21 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 28, 2007, 6:54 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 8:21 pm
- Re: Autocom CDP Pro users please read this - Alan Kane March 28, 2007, 8:45 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 8:56 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 10:44 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 29, 2007, 7:50 am
- Re: Autocom CDP Pro users please read this - dave jacko March 29, 2007, 8:29 am
- Re: Autocom CDP Pro users please read this - Michael Whitworth March 29, 2007, 8:50 am
- Re: Autocom CDP Pro users please read this - Alan kane March 29, 2007, 8:58 am
- Re: Autocom CDP Pro users please read this - michael mcdowell March 29, 2007, 5:58 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 30, 2007, 8:06 am
- re programmed in firing order - Dave Jacko March 30, 2007, 7:06 pm
- Re: re programmed in firing order - Dave F March 30, 2007, 8:13 pm
- Re: re programmed in firing order - D Jackson March 30, 2007, 8:52 pm
- Re: re programmed in firing order - Michael Whitworth March 30, 2007, 11:10 pm
- FIXED - dave jacko April 2, 2007, 6:25 pm
- Re: FIXED - Tony Sefton April 2, 2007, 10:06 pm
- Re: FIXED - Dave Hill April 4, 2007, 8:41 pm
- Re: FIXED - les smith April 5, 2007, 8:51 pm
- Re: FIXED - Dave Hill April 5, 2007, 9:30 pm
- Re: FIXED - Kevin Apps April 5, 2007, 10:57 pm
- Re: FIXED - Dave Hill April 5, 2007, 11:25 pm
- Re: FIXED - Dave Hill April 10, 2007, 9:57 pm
- Re: FIXED - Darren Bamford April 12, 2007, 11:34 pm
- Re: FIXED - Dave Hill April 13, 2007, 12:03 am
- Re: FIXED - Tony Sefton April 14, 2007, 8:28 am
- Re: FIXED - Michael Whitworth April 14, 2007, 8:37 am
- Re: FIXED - Dave Hill April 14, 2007, 6:59 pm
- Re: FIXED - Sean Mc Gettigan April 14, 2007, 8:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Kevin Apps April 18, 2007, 11:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Michael Whitworth April 19, 2007, 9:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Phil Dunmore April 24, 2007, 11:18 pm
- Confused! You will be!!!!! - Dave Hill May 4, 2007, 11:43 pm
- Re:Next Chapter!!! - Tom Sinclair May 12, 2007, 9:54 pm
- Chapter 10 (lol) - Michael Whitworth May 23, 2007, 10:40 pm
- Finally Tamed the Beast!!! - Dave Hill June 15, 2007, 10:12 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Nigel Bennett November 17, 2007, 12:11 am
- So whos got it correct and whos doing it WRONG - D jacko October 1, 2010, 12:49 pm
« Back to index | View thread » |