Autocom CDP Pro users please read this
First let me thank Terry for making the whole thing a little less cryptic Darren thanks for the cryptic clues but as i believe i am coding these injectors correctly i could probably have spent all week trying to work them out. I am fully aware of the procedure that Autodiagnos have for programing the injectors, and i have previously read the programming link in the archives searching for my fault code. However, when programming with the CDP-Pro i have been made aware by the distributor Autocom Ltd that the firing order procedure of programing is to be ignored when using the Autocom tool. This is because those clever little swedes have taken care of this within the tools software. I have been told to program Cylinder 1 = injector code 1, Cylinder 2 = injector code 2 etc. I called the distributer earlier today to double check this way of programming, he said he was 99.9 % sure this was correct, but would give the Manufacturer in Sweden a call to be sure. This he did and by late afternoon he said the manufacturer has stated that i am programming the correct way. They also stated that they are fully aware of the way Autodiagnos do this, but the firing order programing is to be ignored with their tool. I do have to say though that i have not had much experience programming ford injectors with this tool or any other. I have programmed 4 injectors on another Mondeo in this same way for a hesitation/missfire problem at 50-70 mph. I have to say that after programing the car did seem to run much better and quieter. But after two days the missfire came back, i have since removed the 4 injectors and had them tested no 1 and no 4 were intermittently working. Andrew if i had coded this other Mondeo 2003 model incorrectly would it not have run terrible? Also you state in your post above that you have Benchmarked many of the mentioned diag tools. Can you confirm that you have definitely programmed Mondeo injectors using the Autocom CDP-Pro. Also i would be interested to here from other CDP-Pro users who have experience of Ford injector programming. After all we can't rule out that the tool Manufacturer has got it wrong but i have to start by doing it there said way. Cheers and thanks for all the help guys. i'm just doing the times crossword now DJ
|
Message Thread | This response ↓
FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold # - Dave Jackson March 26, 2007, 11:06 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - martin young March 26, 2007, 6:33 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - JASON MARTIN March 26, 2007, 10:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - George March 26, 2007, 10:26 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 7:52 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Alan Kane March 27, 2007, 9:07 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 10:01 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 27, 2007, 7:38 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 28, 2007, 7:55 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Terry Wood March 28, 2007, 9:52 am
- Autocom CDP Pro users please read this - dave jacko March 28, 2007, 5:41 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 6:21 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 28, 2007, 6:54 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 8:21 pm
- Re: Autocom CDP Pro users please read this - Alan Kane March 28, 2007, 8:45 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 8:56 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 10:44 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 29, 2007, 7:50 am
- Re: Autocom CDP Pro users please read this - dave jacko March 29, 2007, 8:29 am
- Re: Autocom CDP Pro users please read this - Michael Whitworth March 29, 2007, 8:50 am
- Re: Autocom CDP Pro users please read this - Alan kane March 29, 2007, 8:58 am
- Re: Autocom CDP Pro users please read this - michael mcdowell March 29, 2007, 5:58 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 30, 2007, 8:06 am
- re programmed in firing order - Dave Jacko March 30, 2007, 7:06 pm
- Re: re programmed in firing order - Dave F March 30, 2007, 8:13 pm
- Re: re programmed in firing order - D Jackson March 30, 2007, 8:52 pm
- Re: re programmed in firing order - Michael Whitworth March 30, 2007, 11:10 pm
- FIXED - dave jacko April 2, 2007, 6:25 pm
- Re: FIXED - Tony Sefton April 2, 2007, 10:06 pm
- Re: FIXED - Dave Hill April 4, 2007, 8:41 pm
- Re: FIXED - les smith April 5, 2007, 8:51 pm
- Re: FIXED - Dave Hill April 5, 2007, 9:30 pm
- Re: FIXED - Kevin Apps April 5, 2007, 10:57 pm
- Re: FIXED - Dave Hill April 5, 2007, 11:25 pm
- Re: FIXED - Dave Hill April 10, 2007, 9:57 pm
- Re: FIXED - Darren Bamford April 12, 2007, 11:34 pm
- Re: FIXED - Dave Hill April 13, 2007, 12:03 am
- Re: FIXED - Tony Sefton April 14, 2007, 8:28 am
- Re: FIXED - Michael Whitworth April 14, 2007, 8:37 am
- Re: FIXED - Dave Hill April 14, 2007, 6:59 pm
- Re: FIXED - Sean Mc Gettigan April 14, 2007, 8:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Kevin Apps April 18, 2007, 11:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Michael Whitworth April 19, 2007, 9:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Phil Dunmore April 24, 2007, 11:18 pm
- Confused! You will be!!!!! - Dave Hill May 4, 2007, 11:43 pm
- Re:Next Chapter!!! - Tom Sinclair May 12, 2007, 9:54 pm
- Chapter 10 (lol) - Michael Whitworth May 23, 2007, 10:40 pm
- Finally Tamed the Beast!!! - Dave Hill June 15, 2007, 10:12 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Nigel Bennett November 17, 2007, 12:11 am
- So whos got it correct and whos doing it WRONG - D jacko October 1, 2010, 12:49 pm
« Back to index | View thread » |