Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold
Thanks Jason and George. I can't check cylinder balance with my tool. but i will test compressions. But i don't think it can be a mechanical fault as the code P2339 will never clear. Also the glow plug light is flashing all of the time. The glow light flashes with just ignition on engine not running also code will not clear with ign on engine stopped. I did suspect my diag tool was not deleting the codes so i have introduced a number of faults i.e air mass, fuel press sol etc then deleted them with no problems. Yes i have drove the car for several miles after trying a re-code. Cheers Dave
|
Message Thread | This response ↓
FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold # - Dave Jackson March 26, 2007, 11:06 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - martin young March 26, 2007, 6:33 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - JASON MARTIN March 26, 2007, 10:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - George March 26, 2007, 10:26 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 7:52 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Alan Kane March 27, 2007, 9:07 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 10:01 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 27, 2007, 7:38 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 28, 2007, 7:55 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Terry Wood March 28, 2007, 9:52 am
- Autocom CDP Pro users please read this - dave jacko March 28, 2007, 5:41 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 6:21 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 28, 2007, 6:54 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 8:21 pm
- Re: Autocom CDP Pro users please read this - Alan Kane March 28, 2007, 8:45 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 8:56 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 10:44 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 29, 2007, 7:50 am
- Re: Autocom CDP Pro users please read this - dave jacko March 29, 2007, 8:29 am
- Re: Autocom CDP Pro users please read this - Michael Whitworth March 29, 2007, 8:50 am
- Re: Autocom CDP Pro users please read this - Alan kane March 29, 2007, 8:58 am
- Re: Autocom CDP Pro users please read this - michael mcdowell March 29, 2007, 5:58 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 30, 2007, 8:06 am
- re programmed in firing order - Dave Jacko March 30, 2007, 7:06 pm
- Re: re programmed in firing order - Dave F March 30, 2007, 8:13 pm
- Re: re programmed in firing order - D Jackson March 30, 2007, 8:52 pm
- Re: re programmed in firing order - Michael Whitworth March 30, 2007, 11:10 pm
- FIXED - dave jacko April 2, 2007, 6:25 pm
- Re: FIXED - Tony Sefton April 2, 2007, 10:06 pm
- Re: FIXED - Dave Hill April 4, 2007, 8:41 pm
- Re: FIXED - les smith April 5, 2007, 8:51 pm
- Re: FIXED - Dave Hill April 5, 2007, 9:30 pm
- Re: FIXED - Kevin Apps April 5, 2007, 10:57 pm
- Re: FIXED - Dave Hill April 5, 2007, 11:25 pm
- Re: FIXED - Dave Hill April 10, 2007, 9:57 pm
- Re: FIXED - Darren Bamford April 12, 2007, 11:34 pm
- Re: FIXED - Dave Hill April 13, 2007, 12:03 am
- Re: FIXED - Tony Sefton April 14, 2007, 8:28 am
- Re: FIXED - Michael Whitworth April 14, 2007, 8:37 am
- Re: FIXED - Dave Hill April 14, 2007, 6:59 pm
- Re: FIXED - Sean Mc Gettigan April 14, 2007, 8:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Kevin Apps April 18, 2007, 11:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Michael Whitworth April 19, 2007, 9:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Phil Dunmore April 24, 2007, 11:18 pm
- Confused! You will be!!!!! - Dave Hill May 4, 2007, 11:43 pm
- Re:Next Chapter!!! - Tom Sinclair May 12, 2007, 9:54 pm
- Chapter 10 (lol) - Michael Whitworth May 23, 2007, 10:40 pm
- Finally Tamed the Beast!!! - Dave Hill June 15, 2007, 10:12 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Nigel Bennett November 17, 2007, 12:11 am
- So whos got it correct and whos doing it WRONG - D jacko October 1, 2010, 12:49 pm
« Back to index | View thread » |