Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold
Followed this thread with great interest, considered starting a fresh one but much of what has been said is important to this. Some of you may have seen my earlier thread on similar vehicle. I was lucky to have problem on cylinder number one! Did another today, same spec as Dave's, year 2002, engine code 8 (Modis & VIN plate) This came to me from another garage with the Modis in the boot(they don't know how to use it), a new injector fitted to number 4 and a note asking me to code it for them to put light out. First thing I did was ask how they knew to replace number 4 "The MAC Man read it" Sure enough "P2339cyl4 knock limit attained" Took numbers directly from all injectors and duly reprogrammed no 4, no change. reprogrammed no 2, light out, code cleared. As cylinder number 2 is number 4 in firing order I conclude the following. a: Modis, Macscan & ACR report code p2339 cylinder numbers in firing order. b: Modis does indeed reprogram in cylinder layout order. c: A right royal cock up has been made, definatly by one scanner manufacturer, probably several others. d: My mate has his new injector in the wrong place How's that then Grand Master Bamford, you knew all along didn't you
|
Message Thread | This response ↓
FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold # - Dave Jackson March 26, 2007, 11:06 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - martin young March 26, 2007, 6:33 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - JASON MARTIN March 26, 2007, 10:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - George March 26, 2007, 10:26 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 7:52 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Alan Kane March 27, 2007, 9:07 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - dave jackson March 27, 2007, 10:01 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 27, 2007, 7:38 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Darren Bamford March 28, 2007, 7:55 am
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Terry Wood March 28, 2007, 9:52 am
- Autocom CDP Pro users please read this - dave jacko March 28, 2007, 5:41 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 6:21 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 28, 2007, 6:54 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 8:21 pm
- Re: Autocom CDP Pro users please read this - Alan Kane March 28, 2007, 8:45 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 28, 2007, 8:56 pm
- Re: Autocom CDP Pro users please read this - Tony Sefton March 28, 2007, 10:44 pm
- Re: Autocom CDP Pro users please read this - Darren Bamford March 29, 2007, 7:50 am
- Re: Autocom CDP Pro users please read this - dave jacko March 29, 2007, 8:29 am
- Re: Autocom CDP Pro users please read this - Michael Whitworth March 29, 2007, 8:50 am
- Re: Autocom CDP Pro users please read this - Alan kane March 29, 2007, 8:58 am
- Re: Autocom CDP Pro users please read this - michael mcdowell March 29, 2007, 5:58 pm
- Re: Autocom CDP Pro users please read this - dave jacko March 30, 2007, 8:06 am
- re programmed in firing order - Dave Jacko March 30, 2007, 7:06 pm
- Re: re programmed in firing order - Dave F March 30, 2007, 8:13 pm
- Re: re programmed in firing order - D Jackson March 30, 2007, 8:52 pm
- Re: re programmed in firing order - Michael Whitworth March 30, 2007, 11:10 pm
- FIXED - dave jacko April 2, 2007, 6:25 pm
- Re: FIXED - Tony Sefton April 2, 2007, 10:06 pm
- Re: FIXED - Dave Hill April 4, 2007, 8:41 pm
- Re: FIXED - les smith April 5, 2007, 8:51 pm
- Re: FIXED - Dave Hill April 5, 2007, 9:30 pm
- Re: FIXED - Kevin Apps April 5, 2007, 10:57 pm
- Re: FIXED - Dave Hill April 5, 2007, 11:25 pm
- Re: FIXED - Dave Hill April 10, 2007, 9:57 pm
- Re: FIXED - Darren Bamford April 12, 2007, 11:34 pm
- Re: FIXED - Dave Hill April 13, 2007, 12:03 am
- Re: FIXED - Tony Sefton April 14, 2007, 8:28 am
- Re: FIXED - Michael Whitworth April 14, 2007, 8:37 am
- Re: FIXED - Dave Hill April 14, 2007, 6:59 pm
- Re: FIXED - Sean Mc Gettigan April 14, 2007, 8:02 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Kevin Apps April 18, 2007, 11:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Michael Whitworth April 19, 2007, 9:04 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Phil Dunmore April 24, 2007, 11:18 pm
- Confused! You will be!!!!! - Dave Hill May 4, 2007, 11:43 pm
- Re:Next Chapter!!! - Tom Sinclair May 12, 2007, 9:54 pm
- Chapter 10 (lol) - Michael Whitworth May 23, 2007, 10:40 pm
- Finally Tamed the Beast!!! - Dave Hill June 15, 2007, 10:12 pm
- Re: FORD Mondeo tdci 2.0 (130) FMBA1 fault code P2339 cylinder 4 above knock threashold - Nigel Bennett November 17, 2007, 12:11 am
- So whos got it correct and whos doing it WRONG - D jacko October 1, 2010, 12:49 pm
« Back to index | View thread » |