Andy: i've tried the crank waveform at the ecu & the cam at the sensor, the crank was a little more difficult to get to at the sensor & as the pattern was normal at the ecu i thought that was good enough for me. the can signals via the pico canbox on pins 6 & 14 are don't seem tobe anything more than noise.
no smell of petrol, drained the filter & left to settle, no separation & i can't see what's stopping it running.
George: it's definitely getting no fuel into the cylinders, with an amps clamp there was no draw we seemed to get about 40v from memory.
Carl: i'll try to get that done in the morning after my Mot's(need to earn a little bit of money to fund my unintentional charity work!) i assume you want to see the injector current via the fuse to catch all 4?
i'm sure it's something very elemental but it's really frustrating
Regards Steve
Message Thread | This response ↓
« Back to index | View thread »