Re: Kent Tungsten Matrix Shells Archived Message
Posted by Chuck Crismon on January 15, 2018, 12:13 pm, in reply to "Re: Kent Tungsten Matrix Shells"
To follow up on the topic of pressures and the single barrel trap models which, take a different stock than sidelocked L.C.'s a snippet from an earlier thread includes glas bedding:
"...If your stock is really soaked with oil or in otherwise bad shape it may need glassing, but I have never encountered a need to glass bed the stock of a Smith SBT gun. I would also advise to pick a load that develops no more than 8500PSI, under 8000 is even better."-Tom Breeden, in RE: So pleased to join your group, have some questions.
|
Message Thread:
- Kent Tungsten Matrix Shells - Tim McNamara November 29, 2017, 7:30 pm
- Re: Kent Tungsten Matrix Shells - Will Favre November 30, 2017, 2:39 am
- Re: Kent Tungsten Matrix Shells - Doug Kubosh November 30, 2017, 5:18 am
- Re: Kent Tungsten Matrix Shells - Drew Hause November 30, 2017, 8:02 am
- Re: Kent Tungsten Matrix Shells - Tim McNamara December 1, 2017, 8:45 pm
- Re: Kent Tungsten Matrix Shells - Tim McNamara January 4, 2018, 10:40 am
- Re: Kent Tungsten Matrix Shells - Drew Hause January 4, 2018, 11:01 am
- Re: Kent Tungsten Matrix Shells - Tim McNamara January 5, 2018, 9:23 am
- CIP - Drew Hause January 5, 2018, 10:09 am
- Re: CIP - Tim McNamara January 5, 2018, 11:05 am
- Re: CIP - Drew Hause January 5, 2018, 11:41 am
- Re: CIP - Tim McNamara January 5, 2018, 3:15 pm
- Re: CIP - Tim McNamara January 8, 2018, 11:07 am
- Re: CIP - Drew Hause January 8, 2018, 1:27 pm
- Re: CIP - Tim McNamara January 10, 2018, 9:56 am
- Re: Kent Tungsten Matrix Shells - Chuck Crismon January 15, 2018, 8:32 am
- Re: Kent Tungsten Matrix Shells - Chuck Crismon January 15, 2018, 12:13 pm
- SAAMI Standards - Drew Hause January 15, 2018, 2:06 pm
|
|