Re: Peugeot 406 HDi, W plate, non-starter Archived Message
Posted by Mark Carter on October 18, 2008, 5:02 pm, in reply to "Re: Peugeot 406 HDi, W plate, non-starter"
Hi Peter, I know what you mean about the bathroom issue(I get up before I go to bed just to get in there) The low pressure readings with the DRV disconnected mean one of two things 1) damaged seals on the DRV. 2)The pump is unable to genarate the pressure.There is a spring inside the DRV with a loading of approx 60 BAR which is why with the wring removed the DRV will "vent" at that pressure. Take the DRV off the back of the pump and LOOK at the "nose"(do not touch)you will probably find that the seals are damaged.(you may need a magnifying glass) Look carefully for swarf on the nose of the valve as any metal particles can only have come from inside the pump.(or been already through the pump,with the same result) Depending on what you find will decide your next move. Regards Mark.
|
Message Thread:
- Peugeot 406 HDi, W plate, non-starter - Peter Rainsley October 15, 2008, 8:30 am
- Re: Peugeot 406 HDi, W plate, non-starter - simon dean October 15, 2008, 6:17 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Peter Rainsley October 15, 2008, 7:53 pm
- Re: Peugeot 406 HDi, W plate, non-starter - george rayner October 15, 2008, 9:12 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Tony Sefton October 15, 2008, 10:30 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Steve Shaw October 15, 2008, 10:47 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Mark Carter October 15, 2008, 11:30 pm
- Re: Peugeot 406 HDi, W plate, non-starter - TONY VAMPLEW October 15, 2008, 11:53 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Peter Rainsley October 16, 2008, 8:37 am
- Re: Peugeot 406 HDi, W plate, non-starter - Bryan Smith October 16, 2008, 9:03 am
- Re: Peugeot 406 HDi, W plate, non-starter - Mark Carter October 16, 2008, 7:07 pm
- Re: Peugeot 406 HDi, W plate, non-starter - martin young October 16, 2008, 8:09 pm
- Re: Peugeot 406 HDi, W plate, non-starter - lee mackintosh October 16, 2008, 10:15 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Peter Rainsley October 16, 2008, 10:33 pm
- Re: Peugeot 406 HDi, W plate, non-starter - Peter Rainsley October 18, 2008, 9:57 am
- Re: Peugeot 406 HDi, W plate, non-starter - Mark Carter October 18, 2008, 5:02 pm
- Re: Peugeot 406 HDi, W plate, non-starter - kevin adam October 16, 2008, 10:48 pm
|
|