Re: LDV MAXUS. Hard/non start
John Hall
|
Just had same problem absolute nightmare eventually found out that crank sensor was not all the way home need to fit the seal into the housing first rather than the normal way of seal onto the sensor then fitting.Would never have believed such a trivial error would cause the non start only from cold.Hope this helps.Regards
|
|
Message Thread
 LDV MAXUS 2.5 VM39 2005 - Hard / non start - Fixed # - Luke browne January 28, 2014, 1:35 pm
- Re: LDV MAXUS. Hard/non start - aidan birley January 28, 2014, 1:58 pm
- Re: LDV MAXUS. Hard/non start - Luke browne January 28, 2014, 2:06 pm
- Re: LDV MAXUS. Hard/non start - Mark Carter January 28, 2014, 6:53 pm
- Re: LDV MAXUS. Hard/non start - Steve Shaw January 29, 2014, 11:50 pm
- Re: LDV MAXUS. Hard/non start - Andy Mason January 30, 2014, 8:27 am
- Re: LDV MAXUS. Hard/non start - Nigel Baldwin March 2, 2014, 11:10 am
- Re: LDV MAXUS. Hard/non start - jamie lambert March 4, 2014, 9:02 pm
- Re: LDV MAXUS. Hard/non start - John Hall March 7, 2014, 1:32 am
- Fixed # - Luke Brown September 14, 2014, 11:20 pm
- Re: Fixed # - Glen Strachan September 24, 2014, 1:47 pm
« Back to index | View thread » |
on March 7, 2014, 1:32 am, in reply to "