Year of Manufacture *: 2006
Engine Size and Code *: 2.2 HDI
( Optional ) ECU Type: EDC 15c2 (?)
( Optional ) Scanner Used: ACR4 G2
( Optional) Fault Codes: See Text
This vehicle has come to my attention because the EML intermittently illuminates. Vehicle drives perfectly with or without MIL showing. On my first visit about a week ago, it displayed 3 fault codes. I noted the results and cleared the ECM. The EML re-appeared yesterday for a few miles and then extinguished.
Fault codes are as follows:
P1607 - Mil o/p circuit malfunction
P1425 - Cat downstream temp signal
P1537 - Accelerator pedal jammed. Strategy
activated (EDC15c2)
No EOBD codes stored.
Customer has had the vehicle only for a couple of weeks and bought from a dealer.
I am of the opinion it may be an ECM software fault and should go back to the dealer to sort. Also normally I find multiple codes are inter linked but I cannot see any correlation with these codes.
My dealings with diesels are limited and learning through experience and forums such as this. I would be grateful for any advice before the vehicle gets thrown back to the dealer.
Regards
Pete M
Message Thread
« Back to index | View thread »