Re: Peugeot Partner 1.9D 2004 - Breaks down, gauges erratic, codes P0122 & P0215 #
Phil Cake
Have spent a lot of time checking/re-checking all the known earth problems,sometimes wiggle test multi plugs at engine control unit(mass of fuses,soldered relays & pcb)E.C.U. & BSI unit would cause relays pump timing soleniod and unit relays to start clicking on and off again.On three occasions it started and ran fine(out of about 100 starts)Spoek again to Mototek, they said faulty relays are common problem.Local dealer has suddenly been supplying lots of units. Got a new one.Found a local guy who was made redundant from bankrupt citroen delaer who has Planet/Lexia english version.He said control unit (labelled as B.S.M.)does not have to be configured.BBA REMAN,MOTORTEK and SYKES(SPI)say it does.Fitted new one, does not start, no glow plug or engine management light with ign. on.Not a single wiff of fuel at tail pipe.BSI will not re-boot now.Put old unit back on.Still the same. SPI will not communicate.Can anyone confirm weather this unit does need to be configured and has anyone experienced these issues.
|
Message Thread
Peugeot Partner 1.9D 2004 - Breaks down, gauges erratic, codes P0122 & P0215 # - Phil Cake February 18, 2010, 3:30 pm
- Re: Peugeot Partner 1.9D 2004 - Breaks down, gauges erratic, codes P0122 & P0215 # - george rayner February 18, 2010, 11:13 pm
- Re: Peugeot Partner 1.9D 2004 - Breaks down, gauges erratic, codes P0122 & P0215 # - Phil Cake March 10, 2010, 9:40 am
- Re: Peugeot Partner 1.9D 2004 - Breaks down, gauges erratic, codes P0122 & P0215 # - steve fisher March 11, 2010, 7:45 pm
« Back to index | View thread » |