on November 5, 2008, 3:24 pm, in reply to "Re: Kia Sedona / 2.9 diesel / 2002 / non starter."
I have changed the rail pressure sensor, no difference. I have checked the rail pressure with my sealed rail kit 211 bar cranking. I have done the same test on a tdci mondeo in our workshop, it was slightly less pressure when cranking but runs fine.
I have scoped the crank sensor and getting a good wave.
I know that a mondeo with the delphi system will not start when the cam sensor is faulty.
I am getting P0340 cam sensor fault when i try to start the car. I have fitted a new cam sensor but no luck.
Thanks
Brian