Re: Difficult opening after firing Archived Message Posted by Bill Graham on March 15, 2017, 4:32 pm, in reply to "Re: Difficult opening after firing" The issue is not present with snap caps, or with dry firing. I had a Fox once that would pierce the primers, but had forgotten about that. Will collect empties next time and see what's there with regards depth of the hits and drag marks. Message Thread: Difficult opening after firing - Bill Graham March 15, 2017, 9:44 am Re: Difficult opening after firing - David Williamson March 15, 2017, 10:32 am Re: Difficult opening after firing - Randy Roberts March 15, 2017, 3:13 pm Re: Difficult opening after firing - Bill Graham March 15, 2017, 4:32 pm Re: Difficult opening after firing - David Williamson March 15, 2017, 5:58 pm Re: Difficult opening after firing - Bill Graham March 15, 2017, 10:06 pm Re: Difficult opening after firing - Bill Graham March 16, 2017, 4:20 pm Re: Difficult opening after firing - David Williamson March 16, 2017, 6:04 pm Re: Difficult opening after firing - Bill Graham March 16, 2017, 7:46 pm Re: Difficult opening after firing - David Williamson March 16, 2017, 8:57 pm Re: Difficult opening after firing - Bill Graham March 17, 2017, 12:56 pm Re: Difficult opening after firing - David Williamson March 17, 2017, 2:10 pm Re: Difficult opening after firing - Bill Graham March 17, 2017, 2:35 pm Re: Difficult opening after firing - Bill Graham March 17, 2017, 6:57 pm Re: Difficult opening after firing - David Williamson March 17, 2017, 8:25 pm Re: Difficult opening after firing - Bill Graham March 18, 2017, 11:44 am Re: Difficult opening after firing - Robert Rambler April 2, 2017, 8:52 am All about the primers - Bill Graham March 20, 2017, 9:44 am Re: All about the primers - David Williamson March 20, 2017, 4:15 pm Re: All about the primers - Jamie April 1, 2017, 6:23 pm Re: All about the primers - Bill Graham April 1, 2017, 6:31 pm Re: Winchester Low Recoil Specs - Bill Graham April 3, 2017, 4:00 pm Re: Winchester Low Recoil Specs - David Williamson April 3, 2017, 6:14 pm Re: Winchester Low Recoil Specs - Bill Graham April 3, 2017, 7:46 pm Closing this thread - Jim Stubbendieck April 4, 2017, 7:33 am   Searching