The rear trigger will fire on Safe.
With the safety selector on Safe and the rear trigger held against the safety link and looking thru the right side, with the right lock plate off, there is about a 1/32" interference with the left sear and left trigger.
Thus, in the safe position, the left sear is resting on the left trigger. The slack in the link allows the hammer not to fire, but when the slack is taken up it will fire.
I have only dry fired with snap caps.
The right side lock works normally and both triggers have play when hammers are cocked.
Off of safety both triggers feel and function as normal. Snapping the forward trigger does not set of the rear.
Any suggestions are appreciated.
387
Responses
« Back to index | View thread »