Re: rebuilt carb and now acts flooded and wont start
okay, so I took the fuel line off and plugged it and blew the manifold and combustion chambers out, filled the carb bowl with good gas and it still acted the same...that is, turns over and fires every rotation but just wont "take hold"....weird, it ran fine before I changed the carb and I guess also changed the master cylinder...just trying to think of anything that I might have effected after changing things...I thought maybe I had accidently removed a large hose or something, allowing a large vacuum leak, but found nothing...did however check the vacuum routing and also found out today that this is actually probably a 1988 1.6 chevette...it is actually a kit car with the chevette drive train, engine and some other things...I am going to check to see if changing the timing may make a difference...still could use some other ideas!
|