Send Your Canadian Walnut To WENIGS Archived Message
Posted by Jent P Mitchell III on November 5, 2012, 2:50 pm, in reply to "Re: Butt Stock From Another LCS From pre 1913"
Hello Lee, Just send your Canadian walnut wood to WENIGS and have WENIGS send your Canadian walnut wood back to you. It will be a 80% inletted and turned L C Smith butt stock when it comes back to you but it is still just walnut wood from Canada. There are several good stock makers in Canada that can fit and finish your butt stock in Canada. I think WENIGS charges about 125 to 175 U S Dollars to shape your blank in to a 80% turned and inletted butt stock. You will need a walnut blank that is about 22 inches long by 8 inches at the fat end and 4 inches at the skinny end and 2.25 inches thick. The pattern that I and Milt and Tom own that we left at WENIGS for all to use for free is for a RIGHT HANDED shooter ONLY. WENIGS has several L C Smith butt stock patterns. Be sure that WENIGS uses the pattern that you want them to use ! Our pattern is for a pre 1913 LCS 12 gauge SXS. Good Shooting To You, Jent
|
|