replies Archived Message
Posted by paul m marshall on March 2, 2007, 10:34 pm, in reply to "Re: peugeot expert 2.0 hdi 2000 RHX bosch EDC15C2"
hi andy
i have had this in the past when the battery voltage drops below 9 volts when cranking causing a no start, the engine control module must see about 10 volts on crank, this could explain why it starts when towed.
using the live data/pids you need to ensure the supply pump from tank is operating
high pressure pump is creating more than 118bar and battery volts do not fall below 9 volts on crank.
hth
paul m marshall
|
| Message Thread:
- Peugeot Expert 2.0 HDi 2000 RHX Bosch EDC15C2 - replaced clutch , now will not start, tow start # - Andy Gladish February 28, 2007, 9:49 pm
- replies - martin young February 28, 2007, 10:53 pm
- replies - Andy Gladish February 28, 2007, 11:12 pm
- replies - Phil Dunmore March 1, 2007, 8:15 pm
- replies - Andy Gladish March 1, 2007, 8:38 pm
- replies - andy gladish March 2, 2007, 5:31 pm
- replies - martinyoung March 2, 2007, 6:44 pm
- replies - Andy Gladish March 2, 2007, 7:45 pm
- replies - Darren Jones March 2, 2007, 8:09 pm
- replies - Andy Gladish March 2, 2007, 9:48 pm
- replies - paul m marshall March 2, 2007, 10:34 pm
- replies - martin young March 2, 2007, 11:23 pm
- replies - aidan birley March 3, 2007, 8:48 pm
- replies - Andy Gladish March 3, 2007, 10:12 pm
- replies - Andy Gladish March 20, 2007, 9:43 pm
- replies - martin young March 21, 2007, 8:01 am
|
|