Year of Manufacture *: 2008
Engine Size and Code *: 2.0 tdi
( Optional ) Scanner Used: Autocom and Autel
( Optional) Fault Codes: p0341, p3007 and p0321
we checked timing belt and badly cracked/split and very slightly slack.we replaced cambelt kit, as we have had problems with tensioner threads.
Valve timing was ok. we fitted a new cam sensor while we were changing the belt.
Car cranks and trys to fire.p0341 keeps coming back. checked cam sensor voltage reading as per Autodata 5v between pin 1 and 3.
live data readings on cranking,260 rpm ,injector timing adjustment -6.7 deg, syncronisation angle stays static 2.62>, and syncro start 3 ignition off and 183 when cranking. i cant get a fuel pressure reading.
Any advice would be appreciated,
thanks Joe
Message Thread
« Back to index | View thread »