Hi

Bleeding info is on AD


Fuel system bleeding Quote


Renew all injector pipes removed.
Hand-tighten injector pipes at injectors.
Tighten injector pipes at pump to 35 Nm.
Remove the fuel supply line to the fuel filter.
Install hand pressure pump inline between fuel filter and fuel supply line. Ford No. 310-110.
Ensure arrow on hand pressure pump is pointing towards fuel filter.
Remove crankshaft position (CKP) sensor. Insert timing tool in CKP sensor housing. Ford No. 303-675 (21-234).
Slowly rotate engine until tool locates fully into flywheel.
Paint alignment marks on crankshaft pulley and timing cover.
Remove timing tool from CKP sensor housing. Install CKP sensor.
Ensure engine is still at TDC.
Operate the hand pressure pump until fuel is seen to escape from one of the injector pipes.
Tighten injector pipe to 35 Nm.
Using paint mark as a reference, rotate crankshaft pulley through 180°.
Repeat previous operations until remaining injectors have been bled.
Check for fuel leaks.

Cheers Aidan