Hi All

Vehicle in yesterday with code present. Customer informed us that Cam sensor was recently replaced after intermittent CEL and limp mode.
Cleared codes and test drove.
Fault returned, but with no CEL or apparent ill effects on drive, customer reports no issues since part was changed, no start / cold start issues. Torsion value ZERO +/-0.5

16725/P0341/000833 - Camshaft Position Sensor (G40): Implausible Signal

Possible Symptoms
Malfunction Indicator Light (MIL) active
Possible Causes
Wiring from/to Camshaft Position Sensor (G40) faulty
Camshaft Position Sensor (G40) faulty
Timing misaligned
Possible Solutions
Check Wiring from/to Camshaft Position Sensor (G40)
Check Camshaft Position Sensor (G40)
Check Timing


Any experience with this fault on the BKD?