customer brought this car in with traction control light on and lack of power
when i connected the solus pro no power up occured on the pro,which is unusal; i powered it up and entered the details
the scanner then came up with vehicle power not detected unable to scan
im thinking wiring harness to injector fault but would like some kind of confirmation from the ecu
so
is it normal for the lack of comms if the harness fails
is there some other likely fault to cause lack of comms
also there is a plastic box with wires going into it on the passenger footwell when i asked the owner about this he said another garage told him to leave it there to prevent water going into it and causing starting issues...new one on me but there you go thanks