Have the above vehicle that only starts occasionally and will only run for approx 10 seconds before cutting out

Fault codes that were there when first inspected was:
P1213 Cold start injector #1

P1213 Cold start injector #1

P0605 Powertrain Control Module Read
Only Memory (ROM) Error

P060C Internal control module main
processor performance

P0380 Glow Plug/Heater Circuit "A"

Fault codes that will not clear are:
P1213 Cold start injector #1

P1213 Cold start injector #1

Fault Code that return is:
P0605 Powertrain Control Module Read
Only Memory (ROM) Error

Not sure if this code could mean ECU Fault or may of been remaped at some stage


the vehicle has been around many garages and has been parked for over a year

Remember reading somewhere that a faulty injector can give a code p1213 and cause a non start but cant seem to find the info now

Unable to check resistance of injectors as they are the Piezo type

Has anyone had anything similar and could advise a direction of either ECU Test or Injector Test first

Thanks
Terry