Fixed #
Message modified by board administrator March 7, 2011, 3:50 pm
Well after stripping half the engine down it was down to the main dealer, we cleaned out all the oil pressure pipes and switches etc but still would not go, so took the cam cover off again ,and on cranking noticed oil coming from no 3 injector on further inspection found they had not been tightened up, removed injectors and no 3 oil seal had collapsed allow oil to bypass and loose oil pressure we removed all injectors and replaced all the seals and after a few seconds cranking it fired up ,as i said the vehicle broke down on road test at the main dealers after they did a injector recall so they did not tighten up the injectors correctly thanks for all your advise and help
|
Message Thread | This response ↓
Isuzu Trooper 3.0 2004 (54) - Non start after recall on injectors - Fixed # - Paul Goswell February 7, 2011, 2:34 pm
- Re: isuzu trooper - martin simonsohn February 7, 2011, 3:26 pm
- Re: isuzu trooper - paul goswell February 8, 2011, 9:54 am
- Re: isuzu trooper - Phil Cake February 8, 2011, 11:36 am
- Re: Isuzu Trooper 3.0 2004 (54) - Non start after recall on injectors # - paul goswell February 10, 2011, 10:06 am
- Re: Isuzu Trooper 3.0 2004 (54) - Non start after recall on injectors # - Kevin Apps February 10, 2011, 10:26 am
- Fixed # - Paul Goswell March 4, 2011, 5:12 pm
- Fixed # - Keith Geach March 5, 2011, 8:16 am
« Back to index | View thread » |