Year of Manufacture *: 206
Engine Size and Code *: 1.9dci
( Optional ) Scanner Used: Modis, renault Clip
I am in need of some information asap please.
The above mentioned Megane came in for a service today. When starting the engine to fill the oil filter it cut out after a few seconds and an injector fault warning came up on the display.
I tried to start if again and it cut out again and now it will not turn over on the button at all. The display now reads battery low even after replacing it with a new battery (fully charged).The orange spanner light and battery lights stay on with the ignition on.I cannot communicate with the instrument cluster or the engine ecu with either the modis or clip.Clip informs me that there is a network fault. I have checked the two 12v power feeds to the ecu and the one is ok but the other only reads 4v. When i apply 12v via my power probe the cluster lights up and the engine will crank for a short while off the button. I need to find the engine relay that supplies this power but i cannot find the information anywhere. I have Autodata cd3, Vivid and Tolerance.I am desperate to fix this car as i have had to let the owner use my own car until it,s repaired.
Sorry for the long post but i thought it best to give as much info as possible.
Thanks, Allan
Message Thread Renault Megane II1.9DCi 2006 - Engine relay location - Fixed # - Allan Davis November 19, 2010, 7:52 pm
« Back to index | View thread »