Since last year I have been buying both 1/700 MRY-SFW and 3D printed un-branded kits off evil site. The MRY-SFW kits that were immediately stripped of masts and other parts and tossed in pail because they cut the hull in half and expected you to use a hacksaw to join bow and stern were the following:
Perry Class Frigate
Independence CVL
Knox Class Frigate
Belknap CG
Charles Adams DDG
Virginia CGN
California CGN
Their 3D printing of detail varied from very good to just shape and form.Really did not matter when they were split in two.

Keepers from MRY-SFW were:
Coontz DDG
Garcia Frigate
Leahy CG
Brooke Frigate
All one piece water line hulls. Their boxed Wichita was nice with one piece hull but I am not too crazy that they printed 20mm guns in place. That will be a tender assembly to be sure.

Now for the unbranded kits in 1/700 one piece hulls:

1944 Enterprise printed in orange resin excellent. (Don’t confuse it with SLA or GAGA)

Ranger printed in orange resin also excellent

LHD Wasp printed in orange resin ok but not excellent

Midway printed in orange resin hit the pail. Missing much detail and parts. It appears they copied the Orange Hobby hull and got lost from there. No particular era and missing a number of sponsors

America LHA 6 printed in gray resin. They split the hull but put holes on one end and matching pins in the other so bow and stern went together with just a line seam. Island needs work, weapons under scale, mast was poop. Keep the Orange Hobby kit but that too was a pain in the butt