That would be normal to a degree, depending on the clearance...
Glen
--Previous Message--
: Hmmm I would ask if the priming tool
: shaft is the same diameter as the
: driveshaft... but the idea of oil
: coming from that hole answers that
: question.
: The dist/op shaft bush has holes into
: main pressure, the oil is going the
: path of least resistance.
: You can make a tool out of an old
: driveshaft, so it fits properly.
: Glen
:
:
: --Previous Message--
: Hi again. I'm ready to fire up e new
: engine and thought it wise to pre oil
: it with adriver through the distributor
: hole. Took out the distrib drive gear
: and made a shft to drive the oil pump.
: Turning the shaft with a drill and I
: get oil pumping up through the drive
: gear hole and no oil pressure on the
: gage or to the top end. What did I do
: wrong here?? P.J.
:
:
:
Responses