Re: L.C. Smith, Gunsmithing Question Archived Message
Posted by Tom Hunger on October 13, 2007, 12:27 am, in reply to "Re: L.C. Smith, Gunsmithing Question"
No, no, NO! Do not reblue using a hot tank. It doesn't matter how much you rinse afterwards. If there is any crevice in the solder, or vent holes in the under rib or gap in the muzzle solder, the hot liquid will be sucked in between the barrels. They WILL come apart. Maybe not now but months or even years down the road. Washing or oiling them only seals the process under the oil and it will continue on.
|
Message Thread:
- L.C. Smith, Gunsmithing Question - Jeb Stewart September 26, 2007, 12:39 pm
- Re: L.C. Smith, Gunsmithing Question - robert stewart October 16, 2007, 3:03 pm
- Re: L.C. Smith, Gunsmithing Question - Bill Ward September 27, 2007, 9:59 am
- Re: L.C. Smith, Gunsmithing Question - Dick Miller September 27, 2007, 9:04 am
- Re: L.C. Smith, Gunsmithing Question - Skip Dunlap September 27, 2007, 8:46 am
- Re: L.C. Smith, Gunsmithing Question - Jeb Stewart September 27, 2007, 2:22 am
- Re: L.C. Smith, Gunsmithing Question - Tom Hunger October 13, 2007, 12:27 am
- Re: L.C. Smith, Gunsmithing Question - John L. September 26, 2007, 1:37 pm
|
|