Straighten and align the sealing block, seal everything well, and it'll be fine.
Glen
--Previous Message--
: Tonight we got the front plate off. The
: bottom of the gasket between the front
: plate and sealing block literally fell
: to the ground when we took the plate
: off... no sealant. No sealant may be
: common and preferred by some but I like
: a bit of Aviation Form-A-gasket on
: those joints. I know that the
: horizontal bolts on the sealing block
: could not be tightened so maybe our oil
: leak really was due to a gasket leak
: after all.
:
: Weather permitting we will finish up
: tomorrow night after work.
:
: Doug L.
:
:
: --Previous Message--
: Doug that's pretty much normal, and the
: chunk of tubafer wedged up in there,
: combined with the length of pipe on the
: breaker bar... or an air gun...is
: SOP...
: Good job, the worst is over!
: Glen
:
:
Responses