Diesel Diagnostics

Post a Response

Renault Trafic 2.0 DCi 2007 - No communication - Fixed #

Posted by Kevin Thomas on July 19, 2017, 6:12 pm

Year of Manufacture *: 2057
Engine Size and Code *: 20 dci

no coms checked all fuses. none runner any one help please.

Re: reno traffic2007

Posted by Kevin Thomas <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat4032' width='330' height='300' border=0 style='border:none;'> on July 19, 2017, 6:15 pm, in reply to "reno traffic2007"
Brian Cook

i ment 2007

Re: reno traffic2007

Posted by Steve Shaw <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3627' width='330' height='300' border=0 style='border:none;'> on July 19, 2017, 6:23 pm, in reply to "Re: reno traffic2007"
Steve Shaw

checking fuses is the starting point, next is the feeds & earths to the ecu at the multiplug to see if the powers & earths are actually getting through, the wiring diagrams on ad & ukat data are quite good, is the immobiliser light going out after the ignition is turned on?

Re: reno traffic2007

im not a auto spark but i no they have wiring fualts ,injectors , egr , and loads more but i do try .ive read some wear about a engine relay do you no about this .steve

Re: reno traffic2007

does anyone no ware engine control relay is.

Re: reno traffic2007

Posted by andrew young <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5148' width='330' height='300' border=0 style='border:none;'> on July 19, 2017, 8:14 pm, in reply to "Re: reno traffic2007"

Main engine ecu fuses and relays are in the fuse box behind the left headlight,below coolant expansion bottle.Access to the engine ecu will need the security bolts drilled out of the steel protection cage.Don't forget cabin fuse box at the end of the dash,passenger side.I think some of these have an inertia cut-off switch attached to the front slam panel (somewhere)

Re: reno traffic2007

thank you

Re: reno traffic2007

Posted by Steve Shaw <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3627' width='330' height='300' border=0 style='border:none;'> on July 20, 2017, 3:46 pm, in reply to "Re: reno traffic2007"
Steve Shaw

does the red immobilser led extinguish after the ignition has been on a few seconds?

Fixed #

Posted by Kevin Thomas on July 20, 2017, 5:34 pm, in reply to "Re: reno traffic2007"
Edited by board administrator July 27, 2017, 11:23 am

fixed and gone. relay number 6 .

« Back to index

[ Diesel Diagnostics ]