Diesel Diagnostics

Back to Forum

Post a Response

Peugeot 307 RHS 2002 - Non start after jump starting #

Posted by Mick Moore on February 17, 2010, 5:38 pm

Year of Manufacture *: 2002
Engine Code or CC *: RHS B/C 0930
( Optional ) ECU Type: BOSCH EDC15C2 96 446 061 80
( Optional ) Scanner Used: PP2000

Hi all,vehicle recovered to us,alt. belt gone,driven till dead"ran ok until 3rd jump start"!!checked with Planet,BSi lost VIN,transponder codes etc.Global test no comms with eng.Reconfigured VIN & confidential code.All ok(had to use new chip in key)
Had this fault before and fixed ok,this one still no goBSi not paired engine ECM.Live data on ECM just reads ?????.Checked all +/-(or have I?)Suspect BSi but on back order 'till end of month and got doubts over the ????? in eng. ECM.My question is(at last)is loss of eng. data normall when BSi duff or am I missing somethig?
Can read ECM codes,glow plug control & FAP system.Not got codes with me at mo
Sods Law wait for BSi and needed ECM aswell/instead!
Sorry for rambling on,needed to talk!!

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by steve fisher <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1920' width='330' height='300' border=0 style='border:none;'> on February 17, 2010, 7:48 pm, in reply to "PEUGEOT 307 NONE START AFTER JUMP START"
Steve Fisher

Hi Mick

How certain are you that the transponder code is 100% correct

Reason i ask is because you said you had to change the chip in the key . if the code was correct than the original key will have coded back in with no issues . The keys are a one hit only and they learn the code as well as the bsi

Steve

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by roy ritchie <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5115' width='330' height='300' border=0 style='border:none;'> on February 17, 2010, 7:52 pm, in reply to "PEUGEOT 307 NONE START AFTER JUMP START"

Its normal to have ??? as live data when ecu is immobilised,Are you using correct confidential code? if you enter wrong code the bsi will learn it but it wont match code in engine ecu.

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by mick moore <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1612' width='330' height='300' border=0 style='border:none;'> on February 18, 2010, 8:51 am, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"
Michael Moore

Morning guys

Good points! Code came via other garage from customer. Not seen original card myself.I'll look into that.Thanks for response,let you know how it goes

mick

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by mick moore <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1612' width='330' height='300' border=0 style='border:none;'> on February 18, 2010, 12:55 pm, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"
Michael Moore

Looks like your right guys! Got code from dealer,nothing like one customer supplied.Got card picked up from his house,he'd given us correct code off it but as owned "a few peugeots" ?!?
Never had this cock-up before.Is it possible to re-write code into BSi?
Thanks again
Mick

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by roy ritchie <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5115' width='330' height='300' border=0 style='border:none;'> on February 18, 2010, 8:31 pm, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"

No its not possible needs new bsi or this guy would help http://www.v12electronics.co.uk/Keys.htm

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by mick moore <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1612' width='330' height='300' border=0 style='border:none;'> on February 19, 2010, 9:06 am, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"
Michael Moore

Morning

Not what what I wanted to hear!
Had a play with it last night and have BSi on order.
Next time get one like this i'm gonna pay my £20 and wait for code from Dealer

Thanks to you both

Mick

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by Lee Pritchard <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1074' width='330' height='300' border=0 style='border:none;'> on February 19, 2010, 12:25 pm, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"
Lee Pritchard

helo,i noticed that there is a brand new bsi for sale in the `unap` forum here,worth a look or a phone call.

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by Phil Dunmore <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5515' width='330' height='300' border=0 style='border:none;'> on February 21, 2010, 10:18 am, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"
Philip Dunmore

If it is possible for BSI to learn "wrong code" should it not be possible to learn correct code again. Have you tried it Mick?

If this is not so then miss keying a code would result in a ruined BSI every time.

I have coded a few 406's that seem to "forget". Need to warn customers about this before coding if wrong code kills BSI.

Re: PEUGEOT 307 NONE START AFTER JUMP START

Posted by steve fisher <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1920' width='330' height='300' border=0 style='border:none;'> on February 21, 2010, 9:05 pm, in reply to "Re: PEUGEOT 307 NONE START AFTER JUMP START"
Steve Fisher

Bsi can be virginised with Planet depending on the bsi software version and the version of Planet

Steve

« Back to index

[ Diesel Diagnostics ]

Copyright © uk autotalk