Re: peugeot 307 20 hdi / Particulate filter blocked Archived Message
Posted by Tony Sefton on June 12, 2009, 8:39 am, in reply to "Re: peugeot 307 20 hdi / Particulate filter blocked"
>>>>>>>>I then checked the live data readings with KOEO and it still showed up in the 980 mb<<<<<< Yes Jamie, If the pressure is reading that far out with KOEO then it must be the pressure sensor, wiring or ecu thats at fault as it cannot have that much pressure in the exhaust at that time. ( unless its got a hell of a blockage ) p,s we fitted a pressure sensor and a filler cap sensor to a C8 a couple of weeks ago and the mb readings did not go back to zero immediately, ( it was obviously a lot better but not zero, so i suppose it needed to re-learn. ??? ) but after a test drive, to which it was still in limp mode it was then parked up for a while, and on the next start up it drove perfectly and the reading went back to zero, and the fault codes cleared which would not clear previously. H.T.H Tony.
|
|