Back to Forum
Post a Response
    Land Rover / Discovery 3 / `05 / 2.7 / TDV6 / SALLAAA135A334422 / No Start Archived Message

    Posted by Rob Nicholson on December 1, 2008, 1:25 pm

    Hi,

    still working on this one but I think some help may be needed! car stopped on M`way no fault codes stored(Solus Landrover & KTS OBD)live data showing fuel press reading 350kPa when cranking! checked low press pump was dead removed fuel tank and new pump fitted, now have low press but still 350kPa rail high press when cranking and stays there a long time after cranking (as before).

    I will look for injector leak back (Siemens system) then see if I can put Delphi HP gauge to both injector banks... I will post later but any advice or previous would be welcome

    Thanks

    Rob

    Message Thread:


Copyright © uk autotalk