This vehicle was recovered to us as a non start after the driver drove into a big ditch which caused some damage to the n/s/f body panels and damaged the intercooler and rad fan. The vehicle cranks then starts and cuts out straight away, feels very much like an inertia fuel cut off switch but he claims the engine was still running after he went into the ditch so he kept trying to drive out of it, he gave up switched off and got the recovery out, at this point it hasn't started since. No fault codes in any modules I've carried out visual checks of wiring in the crash area and nothing is out of place. Have any of you guys had this start stop situation before on one of these. Just to note the vehicle cranks without having to depress the clutch I thought you always did on these vehicles but I'm probably wrong. Any ideas would be greatly appreciated