Year of Manufacture *: 2005
Engine Size and Code *: 2000 Y20DTH
( Optional ) ECU Type: Edc 15
( Optional ) Scanner Used: Tech 2,Vaux com,modis a autel
( Optional) Fault Codes: P1613,P0615,B3059 no engine request received
I have been accuired a headache from another garage which started out a straight forward job.
Vehicle brought to garage with non start,customer wanted pump coded to vehicle. Went to code pump but found keys had been wiped clean and none stored in memory. Recoded keys (cusomer supplied carpass)
Went to code in new pump and just wouldent work.Possble old pump ecu not been reset? Its a bosch pump with ecu on top. Engine spanner light on dash constant flashing. Vehicle is cranking over but will not start.
My thinking is there a way to code the pump if it has not been reset?
Another option i have is perform an immo off on the vehcile if possible? Done a Eeprom course nearly a year ago with Technical topics but like everything you have to do something everyday to get used to it and have not done an eeprom job since then.
Any advice would be much appreciated on which direction next.
I have attached pics of the fault codes i have.
Regards
Lee
Message Thread
« Back to index | View thread »