Ford Galaxy Euro 5 2.0 2013 - Codes P003a & P2263 #
Posted by Mike Hicks on March 5, 2017, 6:18 pm
Edited by board administrator March 6, 2017, 3:18 pm
Year of Manufacture *: 2013 Engine Size and Code *: 2.0 ( Optional) Fault Codes: p2663
we have had a ford galaxy 2013 euro 5,came in with fault code p2263.checked out turbo hoses etc and smoked system, no leaks.check turbo actuator and found it wasn't moving.we had a 5v feed and earth and signal wire .de cited to change turbo.we had to remove dpf and clean as it was blocked .refit and tested, to start with fault code p003a came up [turbo exceeded upper limit] reset adaptions with snap on scanner.fault comes back straight away[after raving car just once.tried resetting it on a launch pad but says test failed.we have checked wiring and eco harness for corrosion all ok.swopped a known good map pressure sensor and airflow meter.check vacuum pipe to turbo and check operation of the solenoid which operates the vacuum to the actuator ,starting to struggle now, any ideas?
|