It starts on the button, but as soon as it drops to idle it stalls. If you keep your foot on the throttle it will be fine.
Once it has run for a couple of minutes it is fine.
No fault codes
I have found that if I disconnect Cam sensor, it doesnt stall, but has no power.
Looking at my cam v crank I would say timing is out but my concern is that it runs well when warm so doubting my diagnosis.
[img][/img]
Message Thread Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank # - Peter Keverne December 18, 2012, 6:52 pm
« Back to index | View thread »