Diesel Diagnostics

Post a Response

Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank #

Posted by Peter Keverne on December 18, 2012, 6:52 pm

Year of Manufacture *: 2004
Engine Size and Code *: 2.2 YD

Posted on behalf of Peter Keverne

Hi

I have a Nissan Primera 54 plate 71,000miles 2.2 diesel engine code YD.

This vehicle has been to other garages who have fitted main dealer cam and crank
sensors, i have removed crank sensor only to find that there is @centimeter movement
left and right of center, garage does not have old sensor to compare, managed to
aquire trace by gently moving crank sensor and bolting up, am very new to scope so
would appreciate comments on trace.

Also aware that this engine can suffer from
chain/cam pulley problems

Thanks

Peter Keverne

Nissan Primera 2.2 2004 Cam & Crank .psdata

If you do not yet own a Pico Scope, you can download the Pico Software free from the link below. You can then download the above .psdata file and view

http://www.picoauto.com/software.html

Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank

Posted by James Eardley <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3143' width='330' height='300' border=0 style='border:none;'> on December 18, 2012, 8:11 pm, in reply to "Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank"
James Eardley

Hi Peter

I have not got a known good for this vehicle.

But,
You are AC coupled.
Try the capture again DC coupled.

Your voltages are going negative.

James

Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank

Posted by Andrew West <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5350' width='330' height='300' border=0 style='border:none;'> on December 18, 2012, 8:31 pm, in reply to "Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank"

Hello Peter,
I think the timing is out as you thought.
Here is a capture taken from an X trail YD22.
Regards, Andrew
http://www.mediafire.com/?4awnuxo1d5cdk9w

Seeming as James has posted an image, here is the image of the known good one .

Uploaded with ImageShack.us

Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank

Posted by Peter Keverne <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2835' width='330' height='300' border=0 style='border:none;'> on December 18, 2012, 9:44 pm, in reply to "Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank"

hi james/andrew
thanks for the replies yes will try again re ac/dc, car going back to garage tomorrow.Andrew thanks for that image,yours does show a real difference.

thanks once again

peter

Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank

Posted by Brad Halse <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3391' width='330' height='300' border=0 style='border:none;'> on December 25, 2012, 7:15 am, in reply to "Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank"
Brad Halse

Hi Peter,

here's a image from a "known good" YD25.

Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank

Posted by Peter Keverne <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2835' width='330' height='300' border=0 style='border:none;'> on December 27, 2012, 8:52 am, in reply to "Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank"
Peter Keverne

hi brad

thanks for that file.

merry christmas and happy new year to all.

peter

Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank

Posted by Glen Strachan on February 12, 2016, 10:28 am, in reply to "Re: Nissan Primera 2.2 YD 2004 - Comments required on Pico .psdata file for Cam & Crank"
Edited by board administrator February 16, 2016, 2:49 pm

YD22 Nissan X Trail is stalling when cold.
It starts on the button, but as soon as it drops to idle it stalls. If you keep your foot on the throttle it will be fine.
Once it has run for a couple of minutes it is fine.
No fault codes
I have found that if I disconnect Cam sensor, it doesnt stall, but has no power.
Looking at my cam v crank I would say timing is out but my concern is that it runs well when warm so doubting my diagnosis.

[img]

[/img]

« Back to index

[ Diesel Diagnostics ]