HI,
Had this one towed in with fault description cam/crank sync. Checked cam belt timing out by 1/2 tooth it was due new belt so fitted, still no
start. Looked on live data and getting fuel pressure and rpm reading and immopliser is working. Scoped cam and crank sensors with no signal off cam sensor so replaced sensor but still non start.
Any advice before i start checking wires etc to ecu and rescoping sensors.
Same code keeps reappearing. Any one give me any info on what type off sensors are one these they have 3 wires are they ac or hall sensors? what voltage should i get?
Thanks Shane