on November 10, 2012, 6:42 pm, in reply to "Re: Vauxhall Corsa C Fuel Pressure"
Those Pressure readings ( TK's ) don't sound correct to me. ??
230 - 300 millibar is only 3.335 - 4.351 Psi
And 20 - 120 KPA is only 2.9 - 17.4 PSI
I would think it needs more than 2.9 PSI to allow the high pressure pump to work. ?? ( Dont these pumps need about 13 PSI to allow fuel to enter, Or am i thinking about a different pump ) ???
The Low pressure with the Coda Teed in between the filter and pump on ours is about 21 PSI with ignition on and slightly higher with the engine running.
Message Thread | This response ↓ 
Vauxhall Corsa C Y13-DT 2005 - Fuel pressure problem, codes P1093, P1191 - Fixed # - Neil Taylor November 10, 2012, 1:33 pm
« Back to index | View thread »