Shane Gray
Lee I,m thinking it,s a bad contact on pins on plug going to ecu. I scooped to pins with plug off and I get good pattern.
Mark the code is p0335 (4) crank position sensor signal a It will show up after clearing if you attempt to start it for 10 secs.
If you look on live data there is no rpm and rpm on cluster doesn't move.
Thanks Shane
Message Thread | This response ↓ 
Vauxhall Corsa 1.0 X10XE 2004 - Non start - Fixed # - Shane Gray August 12, 2012, 1:08 pm
« Back to index | View thread »
on September 11, 2012, 5:49 pm, in reply to "