on July 8, 2012, 10:07 pm, in reply to "V.W Scirocco GT TDI - Turbo Control Actuator Diaphram Split"
I have done one on a passat. I did it on the car, measured the position sensor signal wire first. Then unbolted bracket to lift it up to get access to the locking nuts and clip.
On refitting had to undue bracket a couple of times to get to locking nuts to get the correct voltage on the position sensor.
I may have been lucky but worked OK.
Regards Ian.
Message Thread 
V.W Scirocco GT TDi CBDB 2009 - Turbo Control Actuator Diaphragm Split, code 009571 - Fixed # - Nigel Yardley July 6, 2012, 10:13 am
« Back to index | View thread »