Hi,

I have this van in at present, when driving under load the van dies with glow light flashing.

Code read and the following codes were present;

P1211 'Injector control pressure sensor above/below desired'

P0251 ' Injector pump fuel metering control A malfunction'

I went straight for the vantage pro, supply voltage at IMV was battery voltage KOEO, but sig test was 14v virtually flatline KOER, no pulse at all.

I have read the archives on this one, and there seems to be many factors.

I have checked for fuel filter, this is newish, but not fitted by me.

I have not captured the fuel pressure in live data when the failure happens as I am on my own today, cant drive and operate a scanner!

My thoughts are that I have a faulty IMV, but if anyone has any insight it would be gladly appreciated - I HATE fitting parts that do not cure a fault and make me look daft.

Thanks in advance

Liam.