Had a longer look at this one today. Cleared the 2 codes and took it for a thrash where it quickly dropped into LOS mode. Only one code remained which was PO108. This refers to MAP/Barometer pressure high. Due to the age of the vehicle, I suggested they check to see if it was still under manufacturers warranty as their first step. Tinterweb trawl came up with the following:
Turbo Actuator
MAP Sensor
EGR Valve
So, they are checking this all out and I expect to hear something positive soon which will be posted as a fix.
I have also ascertained the vehicle is a 1.3 and the chassis no. is:WOLOXCS2574351047. Also, although no EOBD codes were present on my 3 scan tools, I found it interesting to note that the Vauxhall specific codes were very much similar to those of EOBD. Also SP G2 does show boost pressure but because the garage was short handed, they could not spare me a tech whilst I watched the boost pressure on a test drive. Shame really because this would have been useful.
May I thank those who have taken an interest in this and hope to post a fix later.
Regards
Pete M
Message Thread
« Back to index | View thread »