Year of Manufacture *: 2003
Engine Size and Code *: 1800 diesel
( Optional) Fault Codes: p0335 p0191 p2288
p2288 Injector pressure to high
p0191 Fuel rail pressure sensor circuit range or performance
p0335 crankshaft position sensor circuit malfunction.
cleared down and after cranking for 5 seconds all came back.
Wrongly assuming that the crank sensor fault was down to non start I started at the rail sensor only for that to check out ok.
Long story short the end of the crank sensor has been worn away by the flywheel rubbing it due to excessive end float on the crank.
It has quite a bit of adjustment so i have set the new sensor with about 2mm of clearance that seems to be the movement on the other end.
Customer advised of worn engine and to expect it again, 135k and a 2003 motor not really worth the labour to sort out the thrust washers.
HTH somebody else
Steve
Message Thread
« Back to index | View thread »
Copyright © uk autotalk