Ford Focus 1.8 TDCi 2003 - Non start fuel pressure codes P0335 P0191 P2288 - Fixed #
Posted by Steve Straw on March 21, 2016, 2:16 pm
Year of Manufacture *: 2003 Engine Size and Code *: 1800 diesel ( Optional) Fault Codes: p0335 p0191 p2288
So, this one lands via the rac broken down, With the codes p2288 Injector pressure to high p0191 Fuel rail pressure sensor circuit range or performance p0335 crankshaft position sensor circuit malfunction.
cleared down and after cranking for 5 seconds all came back.
Wrongly assuming that the crank sensor fault was down to non start I started at the rail sensor only for that to check out ok.
Long story short the end of the crank sensor has been worn away by the flywheel rubbing it due to excessive end float on the crank.
It has quite a bit of adjustment so i have set the new sensor with about 2mm of clearance that seems to be the movement on the other end.
Customer advised of worn engine and to expect it again, 135k and a 2003 motor not really worth the labour to sort out the thrust washers.