Stoneridge Engineering Home |
After each Spot Weld the Relay contacts Fuse together & need to be Phyically Separated inorder to Do another Spot Weld. Can you suggest a Swtching Setup that will not Fuse the Contacts & a Wiring Setup to Turn off Power after each Weld, when the Contacts Don't Fuse Together. Now the Power has to be Shut off after the Weld is Made, the Work removed from the Electrodes, then the relay Contacts Separted, Setup the New Work to be Welded & then Turn On the Power to Charge the Capacitor, & Close the Switch to Weld. Thank You for Considering my inguire. What a Great Web Site you have. Sincerely, Roger Laghezza