Re: Hunter Arms - Fulton special hammer removal and firing pin repacement Archived Message
Posted by David Williamson on September 27, 2015, 2:45 pm, in reply to "Re: Hunter Arms - Fulton special hammer removal and firing pin repacement"
Rick, like I stated, I have never taken the firing pin/s out of the Gladiator, but if there are no springs in there how are the hammer/s getting the tension to put on the sears to cock them? The force you feel when re-cocking them with a screw driver is the pressure of the springs. There has to tension on the hammers using a spring and if you look at the schematic below you will see them. Your gun is the top drawing.
|
|