I am working on my 1898 2E, the ejectors were not consistent, I believe I see the issue with the tumblers, but I am also concerned the flat spring is partially broken off as it has a rough, uneven edge on the flat side. I was unpleasantly surprised when I found there were no drawings in the Plans and Specification book. I have searched the forum archive and found some old posts one from Skip Dunlap that he had tumblers made and another from Jim Akins willing to trace his flat spring...but those posts were years ago. I do CAD/Engineering drawings and would be willing to draw all these parts up so they can be recorded and available now and in the future, but unlike mine I would need good parts to design from. Anyone that is willing and has a good set of calipers, please reach out to me and I will put these together since the original drawings don't seem to exist. gavinwilliams0@me.com