Thanks Tom, I'm glad someone else found this to work as I stumbled upon it accidently.
On my 16 ga. with the HOT the safety will return to safe after firing one barrel and not pushing the trigger forward. On another one that I was going to take apart the trigger could not be returned to safe but pushing the trigger slightly forward it would.

Tom Garver, I have no experience with these triggers but have assembled receiver without stock and with lock plates on and off to watch how it works, pretty amazing. The thing that I do know is that assembling everything to go back together everything has to be just right and one turn to tight or too loose on certain screws and trigger will not work. You have to be very careful when taking a Field Grade gun apart as the side plate connecting screw and the screw from the trigger plate to top tang (behind the safety) are of a different length. The side plate connecting screw's head is slightly thicker and fills the counter sunk hole in the lock plate. I say Field Grade because these screws are not engraved.